Advertisement
Quick Links
Watson Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
locking
dowel
long
x20
nut
x16
screw
x20
x18
H
I
L + R
nut
slide rail
x4
x4
Phillips & Flathead screwdrivers and Hammer
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
E
F
G
small
medium
L + R
screw
screw
slide rail
x16
x10
x4
J
K
long bolt
plastic
x4
guide
x4
WARNING:
W
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
safety
long
strap
screw
x1
x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1
Any furniture that is not anchored to a wall has the potential to tip
1
Advertisement
Related Manuals for Mocka Watson Entertainment Unit
Summary of Contents for Mocka Watson Entertainment Unit
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 (G) to panel [6] and secure with 2 x small screw (E), flip panel over and attach 1 x right rail (G) to panel [6] and secure with 2 x small screw (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Slide panel [6] between the groove on panel [5] as shown. Attach panel [7] to panel [5] and secure with 4 x long screw (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Insert 6 x dowels (C) into panel [2]. Attach panel [2] to panels [3], [4] and secure with 4 x locking nuts (B). Tighten with a screwdriver. and [6] and secure with 6 x long screws (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 Slide panel [16] between the grooves on panels [3] and [4] to form the Tighten with a screwdriver. Attach 4 x plastic guides (K) to panel [8] with back of the unit as shown. a hammer. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 Insert 6 x bolt (A) into panel [1]. Tighten with a screwdriver. Fasten panel [1] to panels [3], [4] and [5] as shown and secure with 6 x dowel (C) and 6 x locking nut (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 4 x small screw (E). Tighten with a screwdriver. drawer as shown. Attach panel [14] to panel [10] and secure with 1 x locking nut (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 Insert each drawer into the unit as shown, ensuring they slide smoothly Attach 1 x wall strap (W) to panel [1] using 1 x screw (Y). Tighten with and easily along the rails. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 9 (W) and secure with 1 x wall anchor (X), 1 x washer (Z) and 1 x long screw. Tighten with a screwdriver. Ensure the unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Watson Entertainment Unit and is the answer not in the manual?
Questions and answers