Table of Contents
Advertisement
Quick Links
Marlow Entertainment Unit
Thank you for your purchase.
Please follow the instructions below for correct assembly.
C
A
B
bolt
locking
nut
screw
x28
nut x28
x4
x26
K
L
J
long
wall
r/washer
screw x4
plug x2
screw x2
Phillips & Flathead screwdrivers required
mocka.co.nz | mocka.com.au
E
F
G
D
large
dowel
small
screw x8
x20
screw x30
M
N
washer
safety
x2
strap x2
Hardware Supplied
WARNING:
to tip over in certain circumstances, i.e. if a child attempts to climb up on
H
I
the furniture or in the event of an earthquake. Accordingly, we recommend
that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your
product tipping. The fixing device provided should fit most wall types, but
please note that different wall materials may require different fixing
devices from those supplied.
L + R slide
rail x6
O
P
wedge
small
screw x4
x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Any furniture that is not anchored to a wall has the potential
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Marlow Entertainment Unit
Summary of Contents for Mocka Marlow Entertainment Unit
- Page 1 Marlow Entertainment Unit Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Marlow Entertainment Unit Assembly Instructions Attach 1x slide rails (I) to one side of panels [7] and [9] and secure with Insert 2x bolts (A) and attach 1x slide rail (H) to panel [2] and secure with 6x small screws (G). Flip each panel over. Attach 1x slide rails (H) to 3x small screws (G).
- Page 3 Marlow Entertainment Unit Assembly Instructions Attach panel [6] and [8] to panel [5] with 4x dowels (F) and secure with Attach panel [7] and [9] to panel [5] with 4x dowels (F) and 4x bolts (A) 4x screws (D). Tighten with a screwdriver.
- Page 4 Marlow Entertainment Unit Assembly Instructions Attach panel [2] and [3] to panel [5] as shown with 4x dowels (F), and Insert 8x dowels (F) into the tops of panels [2], [3], [7] and [9]. Attach secure the bolts with 4x locking nuts (B). Tighten with a screwdriver.
- Page 5 Marlow Entertainment Unit Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Assemble the legs by attaching panels [11] and [12] together with 4x Attach the leg panels to panel [10] and secure with 8x large screws (E). long screws (J) and 4x nuts (C). Tighten with a screwdriver.
- Page 6 Marlow Entertainment Unit Assembly Instructions Drawers x3 Attach slide rails (H) and (I) to panels [14] and [15], and secure with 4x small Slide panel [4] down between the grooves of panel [2] and [3]. Insert 8x screws (G). Insert 4x bolts (A) into panel [13]/[18]. Attach panels [14], [15] and bolts (A) into panel [1].
- Page 7 Marlow Entertainment Unit Assembly Instructions Attach 4x wedges (P) to the corners of panel [4] as shown, and secure Insert the completed drawers into the unit. with 4x small screws (G). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
- Page 8 2x straps (M) to the cabinet with 2x r/washer screws (K). Attach the top end of the straps (M) to the wall using 2x wall plugs (L), 2x washers (N) and 2x screws (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au...
Need help?
Do you have a question about the Marlow Entertainment Unit and is the answer not in the manual?
Questions and answers