Advertisement
Quick Links
Watson Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
locking
dowel
long
x36
nut x36
x14
screw x16
G
H
L + R slide
L + R slide
rail x8
rail x8
Phillips & Flathead screwdrivers and Hammer
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
E
F
small
medium
strap x1
screw x32
screw x24
I
J
K
nut
long bolt
plastic
x4
x4
guide
x4
WARNING:
W
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
safety
long
screw x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1
Any furniture that is not anchored to a wall has the potential to tip
1
Advertisement
Related Manuals for Mocka Watson Four Drawer
Summary of Contents for Mocka Watson Four Drawer
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 (E). Attach 4 x R slide rails (G) to panel [4] and secure with 8 x small and secure with 6 x locking nuts (B). Tighten with a screwdriver. screw (E). Insert 6 x bolt (A) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 [5] and secure with 6 x long screw (D). Attach 1 x safety strap (W) to 4 x long screw (J). Tighten with a screwdriver. panel [5] and secure with 1 x screw (Y). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Attach panels [8] and [9] to panel [2] and secure with 6 x long screw (D). with 4 x long screw (D). Tighten with a screwdriver. Tighten with a screwdriver. Insert 4 x plastic guide (K) into panel [8] with a hammer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 [12] and [11] to form the base of the drawer as shown. Attach panel [14] to panel [10] and secure with 2 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 (F). Attach 2 x slide rails (H) to panels [12] and [11] and dowel (C) and 6 x locking nut (B). Tighten with a screwdriver. secure with 4 x small screw (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 1 x wall anchor (X), 1 x washer (Z) and 1 x long screw. Ensure the unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Watson Four Drawer and is the answer not in the manual?
Questions and answers