Advertisement
Quick Links
Watson Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
bolt
locking
dowel
long
x18
nut x18
x14
screw x16
G
H
L + R slide
L + R slide
rail x2
rail x2
L
M
small screw
hinge x4
x24
Phillips & Flathead screwdrivers and Hammer
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
E
F
small
medium
screw x8
screw x6
I
J
K
nut
long bolt
plastic
x4
x4
guide
x4
WARNING:
W
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
safety
long
materials may require different fixing devices from those supplied.
strap x1
screw x1
X
Y
wall
screw
anchor
x1
x1
Z
washer
x1
Any furniture that is not anchored to a wall has the potential to tip
1
Advertisement
Related Manuals for Mocka Watson Buffet
Summary of Contents for Mocka Watson Buffet
- Page 1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 [19] and secure with 6 x locking nuts (B). Tighten with a screwdriver. screw (E). Insert 4 x bolt (A) into panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 [5] and secure with 6 x long screw (D). Attach 1 x safety strap (W) to with 4 x long bolt (J). Tighten with a screwdriver. panel [5] and secure with 1 x screw (Y). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Attach panels [8] and [9] to panel [2] and secure with 6 x long screw (D). with 4 x long screw (D). Tighten with a screwdriver. Tighten with a screwdriver. Insert 4 x plastic guide (K) into panel [8] with a hammer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 Attach 2 x hinge (M) to panel [17] and secure with 4 x small screw (L). the back of the unit as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 Insert 4 x dowel (C) into panels [3] and [4]. Attach panel [1] to panels [3], Tighten with a screwdriver. [4] and [5] and secure with 6 x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 (E). Attach 1 x R slide rail (H) to panel [11] and secure with 2 x small Attach panel [14] to panel [10] and secure with 2x locking nuts (B). screw (E). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 Insert drawer into the unit as shown, ensuring it slides smoothly and screw (L). Tighten with a screwdriver. easily along the rails. Once assembled, lift furniture into place, do not drag. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 9 (W). Fasten to the wall using 1x wall anchor (X), 1x washer (Z) and 1x long screw. Ensure the unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Watson Buffet and is the answer not in the manual?
Questions and answers