Advertisement
Table of Contents
Solid Wooden Stool
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Bolt
x8
Hardware Supplied
Phillips & Flathead screwdrivers required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
*W e recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au
C
B
washer
feet
x8
x4
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Solid Wooden Stool
Summary of Contents for Mocka Solid Wooden Stool
- Page 1 Solid Wooden Stool Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Bolt washer feet Hardware Supplied Phillips & Flathead screwdrivers required For quicker assembly, we recommend the use of a power drill on a low-speed setting.
- Page 2 Solid Wooden Stool Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. Attach legs [2] and [3] to panel [1] with 8 x bolt (A) and secure with 8 x washers (B). Cross the leg [3] with the leg [2] as shown. Attach 4 x feet (C) to the bottom Tighten with a screwdriver.
Need help?
Do you have a question about the Solid Wooden Stool and is the answer not in the manual?
Questions and answers