Advertisement
Quick Links
Jack Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
B
C
A
bolt
dowel
screw
x20
x12
x8
H
I
J
slide
slide
cam bolt
rail x1
rail x1
x8
O
P
small
small
bolt
locking
x4
nut x4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
locking
slide
screw
nut x12
rail x1
x16
K
L
wedge
screw
x8
x8
Q
R
T
long
hinge
screw
x24
x4
screw x10
Hardware Supplied
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
F
G
slide
rail x1
M
N
allen key
handle
x
3
x1
U
screw
x4
WARNING:
potential to tip over in certain
to climb up on the furniture or in the event of an earthquake.
we recommend that
safety wall anchor
to prevent yourproduct tipping. The fixing device
wall types,
fixing
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Any furniture that is not anchored to a wall has the
circumstances, i.e. if a child attempts
all furniture is anchored to a wall. We supply a free
with all furniture sold and we recommend these are used
but please note that different wall materials may require different
devices from those supplied.
Y
Z
wall
washer
x2
screw
x1
Accordingly,
provided should fit most
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Jack Entertainment Unit
Summary of Contents for Mocka Jack Entertainment Unit
- Page 1 For quicker assembly, we recommend the wall types, but please note that different wall materials may require different fixing devices from those supplied. use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver. Attach 1x slide rail (G) to panel [4] and secure with 3x screws (E). Insert 4x bolts (C) to the panels [3] and [4]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panels [6], [7], [3] and [4] to top panel [1] with 8x dowels (A) . with 4x locking nuts (D) and tighten with a screwdriver. Secure with 8x locking nuts (D) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Between panels [6], [3], [4] and [7] to form the back of the unit Attach bottom panel [2] to the rest of the unit using 8x dowels (A). Secure with 8x screws (B) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panels [11] to the panels [10] with 8x cam bolts (J) and tighten Attach leg panels to the bottom panel [2] with 10x screws (T), and with an Allen key (N). tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 (R). Attach 2x handles (M) to door panels [12] and [13] and of the hinges (Q) with 16x screws (R) as shown. Tighten with a screwdriver. secure with 4x screws (H). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Insert 4x small bolt (O) into panel [14]. Tighten with a screwdriver. Attach panels [15] and [16] to panel [14] with 4x small locking nuts (P). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Slide panel [17] along the grooves between the side panels [15] Attach panels [15], [16] and [18] with 4x screws (U). and [16] to form the base of the drawer. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Attach slide rails (I) and (H) to panels [16] and [15] with 4x small screws (E). Attach handle (M) to panel [14] with 2x screws (E).Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 8x small screws (L).Attach 1x safety strap (V) to the top panel [1] of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 11 Once assembled lift furniture into place, do not drag. Attach the other end You’re done, enjoy! of the safety strap (V) to the wall using 1x screw (Y), 1x wall plug (X) and 1x washer (Z). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Jack Entertainment Unit and is the answer not in the manual?
Questions and answers