Step 1; Step 2; Step 3; Step 4 - L.L.Bean MISSION UNDER WINDOW BOOKCASE Assembly Instructions

STEP 1

Read through these instructions thoroughly. We
have found this to be of great value when first
assembling this product.

STEP 2

Remove all parts and hardware from packing
material. Place wooden parts on non-abrasive
surface (like carpet or carton) to prevent damage to
finish. Identify all parts using diagram at right.

STEP 3

Identify and count hardware using diagram at right.
Assembly of this product requires a Phillips
screwdriver and a hammer. We have found it
helpful to have a second person assist with
assembly.

STEP 4

Lay one side assembly (A) on edge and attach fixed
shelf (B) to bottom end with two 1 1/4" screws.
Thread screws into countersunk holes in side
assembly and into edge of shelf.

STEP 5

Attach top shelf to side assembly with two 1 1/4"
screws. Thread screws into predrilled holes in side
assembly and into pre drilled holes in cleats on
underside of top shelf.
PARTS
(2) Side Assembly (A)
(1) Fixed Shelf (B)
Top Shelf (C)
(1) Adjustable Shelf (D)
DH29070201