Table of Contents
Advertisement
16. To connect and install the hands-free facility control module
C2/40
D
F
A3
15
D2
D1
F1
Retrofit / Installation kit No.: 84 64 0 021 187 (see cover sheet for others)
Installation instructions No.: 01 29 0 021 199
42
43
2
41
F 46 0672 B
The figure shows the footwell on the passenger
side.
Screw branch D2, coaxial plug casing FME, to
the coaxial socket casing FME (40) installed in
the tube or, on cars with SA 640 telephone
preparation, to branch C2, coaxial socket casing
FME on the aerial adapter cable C.
Affix the protective strip (15) to the cable so
that the screw connection (D2 + 40) or (D2 + C2)
are enclosed in it.
Connect branch D1, black 12-pin plug casing,
Western plug, on the mobile phone holder with
connection cable, to the grey 15-pin socket
casing (41) on the hands-free facility control
module (2).
Connect branch A3, white 6-pin socket casing
on the adapter wiring harness A, to the white
6-pin plug casing (42) on the hands-free facility
control module (2).
Connect branch F1, black 3-pin socket casing
for the speech input key, to the grey 3-pin plug
casing (43) on the hands-free facility control
module (2).
Issue date: 02.2001
EN/24
Advertisement
Table of Contents
