BMW 84 64 0 021 187 Parts And Accessories Installation Instructions page 21

13. To install and connect the adapter cable in cars with SA 640 telephone preparation
C1
41
X4545B
40
C
40
Retrofit / Installation kit No.: 84 64 0 021 187 (see cover sheet for others)
Installation instructions No.: 01 29 0 021 199
15
C
A
A1
A2
F 46 0663 B
A3
A
C2
41
F 46 0664 B
Cars with SA 640 telephone preparation after
PU 9/98 only
Connect branch A1, black 18-pin plug casing on
the adapter wiring harness A to the black 18-pin
socket casing X4545B on the tied back
telephone wiring harness (40).
Branch A2, white 6-pin plug casing on adapter
wiring harness A is not needed.
Screw branch C1, coaxial socket casing mini
UHF , on the aerial adapter cable C to the coaxial
plug casing mini UHF (41) on the tied back
telephone wiring harness (40).
Then lay the adapter wiring harness A with
branch A3 and the aerial adapter cable C with
branch C2 to the installation location of the
hands-free facility control module.
Affix the protective strip (15) to the cable so
that the plug connections (A1 + X4545B) and
branch A2 are enclosed in it.
When refitting the centre console, ensure
that the plug connections and the cables are not
jammed or damaged.
In addition ensure that the handbrake lever
moves freely.
Cars with SA 640 telephone preparation only
Lay the adapter wiring harness A with branch A3
and the aerial adapter cable C with branch C2
along the gearbox tunnel (40) within the
instrument panel (41) to the footwell on the
passenger side and secure it with cable ties.
Issue date: 02.2001 EN/19