BMW 84 64 0 021 187 Parts And Accessories Installation Instructions page 19

13. To install and connect the adapter cable in cars with SA 640 telephone preparation
C1
41
X4545B
40
X4546B
40
Retrofit / Installation kit No.: 84 64 0 021 187 (see cover sheet for others)
Installation instructions No.: 01 29 0 021 199
E
15
C
A
A1
A2
F 46 0660 B
F 46 0661 B
Cars with SA 640 telephone preparation
before PU 9/98 only
Connect branch A1, black 18-pin plug casing on
the adapter wiring harness A to the black 18-pin
socket casing X4545B on the tied back
telephone wiring harness (40).
Connect branch A2, white 6-pin plug casing on
adapter wiring harness A to the black 6-pin
socket casing X4546B on the tied back
telephone wiring harness (40).
Screw branch C1, coaxial socket casing mini
UHF , on the aerial adapter cable C to the coaxial
plug casing mini UHF (41) on the tied back
telephone wiring harness (40).Then lay the
adapter wiring harness A with branch A3 and the
aerial adapter cable C with branch C2 to the
installation location of the hands-free facility
control module.
Affix the protective strip (15) to the cable so
that the plug connections (A1 + X4545B), (A2 +
X4545B) and (C1 + 41) are enclosed in it.
When refitting the centre console, ensure
that the plug connections and the cables are not
jammed or damaged.
In addition ensure that the handbrake lever
moves freely.
E46/C cars with SA 640 telephone preparation
after PU 9/98 only
The figure shows the area behind the rear seat
backrest on the left.
Remove the cover (40) to allow you to connect
the telephone adapter cable B to the existing
telephone wiring harness.
Issue date: 02.2001 EN/17