Table of Contents
Advertisement
16. To connect and install the hands-free facility control module
18
Retrofit / Installation kit No.: 84 64 0 021 187 (see cover sheet for others)
Installation instructions No.: 01 29 0 021 199
40
2
5
19
41
F 46 0673 B
Insert the retaining plate (5) with the connected
and bolted hands-free facility control module (2)
into the glove box holder (40) and place it on the
stud bolt (41).
As you insert the retaining plate (5) ensure
that you do not damage any cables or lines. If
necessary tie the cables/lines out of the way.
Secure the retaining plate (5) with the two fillister
head self-tapping screws 3.5 x 9.5 (18) and the
10 mm plastic cap nut (19).
Tie back any excess lengths of the adapter
wiring harness A or the connection cable D on
the mobile phone holder and secure them with
cable ties.
Issue date: 02.2001
EN/25
Advertisement
Table of Contents
