BMW 84 64 0 398 228 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. BMW Manuals
  4. Automobile Accessories
  5. 84 64 0 398 228
  6. Installation instructions manual
BMW 84 64 0 398 228 Installation Instructions Manual

BMW 84 64 0 398 228 Installation Instructions Manual

Universal charger/hands-free kit retrofit for 3 series saloon e90
Hide thumbs
Table of Contents

Advertisement

Quick Links

Parts and Accessories.
Installation Instructions.
Universal charger/hands-free kit retrofit
BMW 3 Series Saloon (E 90)
These installation instructions are only valid for cars with SA 606 (Business navigation system)
or SA 609 (Professional navigation system) or SA 663 (BMW Professional radio).
Retrofit kit No.
Installation time
The installation time for cars with a roof function centre is approx. 6.0 hours, for cars without a roof
function centre it is approx. 6.5 hours, although these times may vary depending on the condition of the
car and the equipment in it. For cars without SA 606 or SA 609, the installation will increase by approx.
1,0 hours for the installation of the roof aerial.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation
and by authorised BMW service companies.
In any event the target group for these installation instructions is specialist personnel trained on BMW
cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals
and work instructions in a rational order using the prescribed tools (special tools) and observing current
health and safety regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problems occur,
after a brief troubleshooting session (approx. 0.5 hours), an inquiry is to be sent straight away to
the technical parts support via the Aftersales Assistance Portal (ASAP), quoting the chassis
number, the part number of the retrofit kit and a precise description of the problem.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP.
See ASAP for details of the pictograms.
Pictograms
Denotes instructions that draw your attention to special features.
denotes the end of the instruction or other text.
Subject to technical modifications.
Before you install the retrofit system, test the control module status with the CIP (coding, customising,
programming) test program. If the test detects incorrect statuses in one or more control modules, these
must be updated first using the "Load software" function.
© BMW AG, München
84 64 0 398 228
01 29 0 401 236
02.2005 (Z/Z)
1

Advertisement

Table of Contents
loading

Related Manuals for BMW 84 64 0 398 228

Summary of Contents for BMW 84 64 0 398 228

  • Page 1 These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
  • Page 2 Ensure that the cables/lines are not kinked or damaged as you install them in the car. The costs incurred as a result of this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties.

  • Page 3: Table Of Contents

    14. Circuit diagram ..............21 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 4: Parts List

    Hands-free microphone trim (2x, dependent on colour, for cars without roof function centre only) Installation frame (for cars without roof function centre only) Plug connector holder Speed nut (only for cars without SA 606 or SA 609) 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 5: Preparations

    Driver's seat 52 13 000 Oddments box 51 16 200 Glove compartment 51 16 366 Unfasten the fuse box Roof aerial (for cars without SA 606/609 only) 65 20 035 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 6: Connection Diagram

    Cable eyelet Terminal Earth post behind the left backrest side X13016 part 0.35 mm 3-pin SW socket casing To hands-free microphone C X3564 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 7: Installation And Cabling Diagram

    Hands-free microphone Universal charger/hands-free electronic control module (ULF) Roof aerial (for cars without SA 606 or 609 only) Eject box Fuse holder A4010 Main distributor station X14255 Earth post X13016 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 8: To Install And Connect The Wiring Harness

    090 0134 Z Release the main distributor station X14255 behind the left backrest side section. Remove the cap from the distributor station. X14255 087 0028 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)
  • Page 9 Route branch A15 to the left A pillar. Route branches A1 – A2 to the instrument panel. Route branches A3 – A4 to the centre armrest. A1-A2 A3-A4 087 0074 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)
  • Page 10 (1) and connect it to PIN 6 of plug X11003. If PIN 6 is already occupied, connect branch A2 to the connected cable using a miniature connector J. X11003 087 0069 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)
  • Page 11 To install and connect the wiring harness Insert fusible link O into slot 26. If slot 26 is already occupied, replace the fusible link. 090 0144 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 12: To Install And Connect The Universal Charger/Electronic Hands-Free Control Module

    D. 087 0079 Z Secure the cable from branch A5 to the side of the ULF holder E using a cable tie K. 087 0092 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 13: To Install And Connect The Roof Aerial

    For cars with SA 606 or SA 609, the Fakra socket casing (1), BL, is to be connected to connector X13393 on the roof aerial F. X13393 090 0142 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 14: To Install And Connect The Bluetooth Aerial And Hands-Free Microphone

    Cut out the marked area on template P and place it on the interior light (1). Mark the contours of the cut-out (2) for the hands-free microphone and cut out the headlining (3). 087 0299 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)
  • Page 15 Route branch A15 through the installation frame R and connect it to the hands-free microphone Clip the hands-free microphone trim Q into installation frame R. 087 0301 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 16: To Install And Connect The Eject Box

    Fakra plug (2) on the eject box. Clip the plug connectors into the plug connector holder S. Slide the plug connector holder S into the centre console (3). 090 0132 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 17: To Secure The Heat Insulation In The Boot Floor

    For greater clarity, the illustration does not show the rear axle differential. Push the rear axle differential heat insulation G on to the stud bolt and secure it with speed nuts H. 090 0137 Z 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 18: 11. Concluding Work And Coding

    - Encode the retrofit with SSS (software service station) via the CIP path - Conduct a brief test - Register the mobile phone in the car (see section 12 or 13) - Re-assemble the car 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 19: To Register The Mobile Phone In The Car (Cars With Sa 606 Or Sa 609 Only)

    - Switch off the ignition for at least 30 seconds - Quit the mobile phone sub-menu again If the registration process was not completed successfully, repeat the entire process quickly. 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 20: To Register The Mobile Phone In The Car (Cars With Sa 663 Only)

    - Switch off the ignition for at least 30 seconds – the registration/pairing process is complete If the registration process was not completed successfully, repeat the entire process quickly. 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

  • Page 21: Circuit Diagram

    14. Circuit diagram 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)
  • Page 22 Main distributor station behind the left backrest side section, A12* + A13* All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram. Cable colours Blue Brown Yellow Grey Black White 01 29 0 401 236 © BMW AG, München 02.2005 (Z/Z)

Table of Contents