Stove Dimensions - Vermont Castings Stardance SDV30 Installation And Operating Manual

Stardance Direct Vent/Natural Vent Gas Heater
Stardance Direct Vent / Natural Vent Dimensions
The Stardance stove is shipped from the factory as a Direct Vent Gas Heater. This heater
may be converted into a Natural Vent unit in the field. If a Natural Vent heater is desired,
the Vermont Castings Z31D00 FSDHAG Draft Hood must be directly installed to the top
of the unit according to the installation instructions. The Draft Hood Adapter is available
in the 7FSDHASK stove kit or as a separate item.
When the Stardance stove is converted to Natural Vent, it uses 4" vent pipe. For aes-
thetic purposes the CFM direct vent system may be used up to the ceiling.
4
9"
(229 mm)
26���"
(680 mm)
25"
(635 mm)
7065
Attention
Stardance fully assembled
dimensions
1/6/04 djt
C L Valve
Inlet
Valve Inlet
C L
3"
(76 mm)
14���"
(355 mm)
20007065