Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elma Instruments FieldSense 2.0
Summary of Contents for Elma Instruments FieldSense 2.0
- Page 1 Manual FieldSense 2.0 EAN: 5706445111558...
- Page 2 EMF/RF overexposure. The FieldSENSE 2.0 measures both E and H fields spanning from 50 MHz to 6 GHz with an isotropic probe architecture. The probe response is shaped to internationally accepted exposure safety limits and is designed for both body worn, handheld or remote monitoring applications.
- Page 3 FieldSense 2.0 Climbers harness attachment bars Unique barcoded serial number Heavy duty shock absorbing elastomer outer layer Lanyard attachment point USB connection Access to batteries Calibration expiry date Tripod attachment • Prior to entering an area where transmitting antennas could be present be sure to switch your FieldSENSE on.
- Page 4 Fall detection & alarm • The FieldSENSE 2.0 is equipped with a 3-axis accelerometer which is able to detect if the device experiences a fall. • This is immediately active when the device is switched on, and should the device detect a fall of approximately 2m it will sound an alarm •...
- Page 5 FieldSense 2.0 Replacing the batteries • When the Low Battery Indicator begins to flash, replace the batteries. • Open the elastomer flap at the bottom of the FieldSENSE revealing the battery lid screws. • Remove the screws and lid and slide out the old batteries. Dispose of these correctly.
- Page 6 FieldSense 2.0 Specifications • Frequency range of operation 50MHz - 6 GHz • Frequency response Shaped (Occupational/Controlled) ICNIRP (1998) FCC [NCRP] OET65 (1997) Canada Safety Code 6 (2015) IEEE C95.1 (2005) *(see associated table) • Sensor polarization Isotropic • Isotropy * ±...
- Page 7 FieldSense 2.0 Calibration certificate Alphawave Products (Pty) Ltd hereby certifies that the performance of this unit has been verified to be within operating specifications. Serial Number: Calibration Date: Valid for 24 months QA Approved field SENSE email support@fieldsense.com tel + 27 21 880 1880 (INTL) www.fieldsense.com...
- Page 8 FieldSense 2.0 Regulatory compliance CE Compliance for Europe The manufacturer, EMSS Consulting (Pty) Ltd, hereby declares that Field- SENSE 2.0 complies with the essential requirements of the following Directives; 2012/19/EU-Waste Electrical and Electronic Equipment; 2011/65/EU- Restriction of the use of Hazardous Substances;...
Need help?
Do you have a question about the FieldSense 2.0 and is the answer not in the manual?
Questions and answers