4�6 Operating Instructions - Calorex IPT 8 Series Owners & Installation Manual

4�6 OPERATING INSTRUCTIONS
a� Power On & Power Off
Press to power on or power off the heat pump.
b� Temperature Setting
Press - to display and adjust temperature.
+
c) Mode selection
1. Heating/Cooling/Auto modes
Press to choose heating, cooling and automatic
mode.
In heating mode the
In cooling mode the
In automatic mode the
on.
2. Whisper and Boost modes
Press to start Boost mode, and light will turn on.
Press to start Whisper mode, and light will turn
on. (Default mode is Boost).
Please choose Boost mode
1005494 ISSUE 3
light is on.
light is on.
and the lights are
for initial heating.
c� Defrosting
1. Automatic defrosting
When machine is defrosting, the
after defrosting the
2. Forced defrosting
When the heat pump is heating and the compressor
has been working continuously for at least 10 minutes,
press and on the touchscreen controller
-
+
simultaneously for 5 seconds to start forced defrosting.
The lamp flashes and defrost starts,
when the lamp stops flashing defrosting stops.
The interval between forced defrosts must be more
than 30 minutes.
lamp flashes;
lamp is illuminated.
31