Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
13.4.5 Other Advanced Wireless Options
If you select the Other Advanced Wireless Options link in the Advanced Security Settings screen, the following
screen will appear. From the drop-down menus, select the desired settings. Then, click Apply to allow the settings to
take effect.
Beacon Interval
DTIM Interval
Fragmentation Threshold
RTS Threshold
Supported Rates (Mbps)
802.11b Rates (Mbps)
802.11g Rates (Mbps)
030-300536 Rev. A
Wireless Advanced Configuration
The time interval between beacon frame transmissions. Beacons contain rate and
capability information. Beacons received by stations can be used to identify the
access points in the area.
The number of Beacon intervals between DTIM transmissions. Multicast and
broadcast frames are delivered after every DTIM
Any MSDU or MPDU larger than this value will be fragmented into an MPDU of
the specified size.
RTS/CTS handshaking will be performed for any data or management MPDU
containing a number of bytes greater than the threshold. If this value is larger than
the MSDU size (typically set by the fragmentation threshold), no handshaking will
be performed. A value of zero will enable handshaking for all MPDUs.
These are the allowable communication rates that VersaLink will attempt to use.
The rates are also broadcast within the connection protocol as the rates supported
by VersaLink.
69
User Guide
August 2007
Advertisement
Table of Contents
