Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
Public LAN DHCP Server Enable
Public LAN Enable
Public LAN IP Address
Public LAN Subnet Mask
If you clicked the Public LAN DHCP Server Enable box, the following screen will appear. Click the Public LAN
Enable box (a check mark will appear in the box).
WARNING: By enabling the Public LAN DHCP Server, you automatically disable the Router's Private LAN
DHCP Server. (Private LAN DHCP is the default setting for VersaLink.)
030-300536 Rev. A
Public LAN
Default = Disabled (deselected)
If this box contains a check mark, this enables DHCP addresses to be
served from the Public LAN pool.
Default = Disabled (deselected)
If this box contains a check mark, this enables the addresses from the
Public LAN to bypass the NAT interface.
Provides a Public IP Address if the service provider does not
automatically provide one.
Provides a Public Subnet Mask if the service provider does not
automatically provide one.
162
User Guide
August 2007
Advertisement
Table of Contents
