Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
The following screen shows a check mark in the Enable Remote Access and Disable Timeout check boxes. The
following message is displayed:
Remote access is currently enabled. After 20 minutes of inactivity, or on reboot, remote access will be
automatically disabled.
After 20 minutes of inactivity or on reboot, Remote Access will be automatically disabled. To disable Remote
Access, click the Enable Remote Access box to clear the check mark. Then click Apply to allow the change to take
effect.
030-300536 Rev. A
125
User Guide
August 2007
Advertisement
Table of Contents
