Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
13.4.3 Wireless MAC Authentication
If you select the Wireless MAC authentication link in the Advanced Security Settings screen, the following
screen will appear. This screen allows you configure wireless MAC address authentication in the Router. By
enabling the Access List, you can permit or restrict wireless access to the Router based on specific MAC addresses.
To limit access to the Router using the MAC address of specific wireless devices, follow the steps below:
1. Click the Enable Access List check box (a check mark will appear in the box).
2. Click Apply to save the setting, and then click OK in the pop-up screen.
To add, edit, or delete the MAC addresses of wireless devices, click the desired button below the List window.
For example, to Add a MAC address, click Add.
030-300536 Rev. A
64
User Guide
August 2007
Advertisement
Table of Contents
