Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
8.2 Changing the Password
After you have clicked OK in the Modem Secure screen, the following User Settings screen will appear. This
screen allows you to change the default administrator name and password to the values of your choice. The
password change is required to continue your network logon. If the Router is password protected and you are not an
authorized user, you will not be able to change the values in this screen. The Router cannot be configured unless an
authorized user is logged in. If necessary, contact your network administrator for further instructions.
IMPORTANT:
1. The User Settings screen allows you to use admin as your administrator name (your administrator name can
match your user name). However, this screen does not allow you to use "password" as your administrator
password. If you enter password in the fields, this screen will not continue the logon. You must enter a different
password in order for this screen to take effect. The values in these fields are case sensitive. Once you decide on
an administrator name and password, please record them for future reference.
2. This feature changes the Administrator's password, not the PPP password.
Type your administrator User Name and Password in the fields provided. The password fields will be masked for
security purposes.
030-300536 Rev. A
32
User Guide
Type admin or
the name of
your choice.
Type a new password.
(Do not type the word
password here.)
August 2007
Advertisement
Table of Contents
