Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
2. Type the name of the custom service that you are creating in the field provided. This will be the name of the
port forwarding service for which you are configuring specific Port Triggering rules.
3. Enter the desired Global Port Start, Global Port End, Local Port Start, and Local Port End values in the fields
provided, as shown in the example below.
4. Select the desired Incoming and Outgoing protocol for the rule.
5. Click Apply to allow the changes to take effect.
NOTE: If you clicked Cancel in the Create Port Triggering Service screen, the values you entered will be
displayed; however, they will not be active in your Router. You must click Apply to allow the settings to take effect.
Global Port Start
Global Port End
Local Port Start
Local Port End
Incoming Protocol
Outgoing Protocol
030-300536 Rev. A
Port Triggering Service
The WAN side TCP/UDP start port.
The WAN side TCP/UDP end port.
The local LAN side TCP/UDP start port.
The local LAN side TCP/UDP end port.
The protocol to use for inbound traffic.
The protocol to use for outbound traffic.
115
User Guide
August 2007
Advertisement
Table of Contents
