Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
16.6 Remote Administration
In the Advanced screen, click Remote Administration. This screen allows you to configure your Router so that it
can be accessed remotely via a URL. Configure this feature to allow maintenance or troubleshooting for your Router.
WARNING: With Remote Administration enabled, your network will be at risk from outside attacks.
To enable Remote Administration, do the following:
1. Type the desired user name.
2. Type the desired password.
NOTE: The password should be at least 4 characters long and should not exceed 32 characters. Do not
type a blank space or asterisks in the Password field. The password is case sensitive.
3. Enter the number of minutes after which remote access will disconnect, if it is idle.
NOTE: If you click the Disable Timeout check box (a check mark will appear in the box), this will
override the preceding timeout minutes, and remote access will remain activated once you enable it.
4. Click the Enable Remote Access check box (a check mark will appear in the box).
5. Click Apply to allow the settings to take effect.
030-300536 Rev. A
139
User Guide
August 2007
Advertisement
Table of Contents
