Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
The following example illustrates Simple Config using the Push Button Method:
1. At the Simple Config screen, click the black Enable Simple Conf button, and then select Use Push Button
method.
2. Next, either click the simple config button
IMPORTANT: You must return to the client and run the wi-fi protected setup Wizard within 2 minutes of either
pressing the Simple Config button on your Router or clicking the Simple Config button in the screen.
030-300536 Rev. A
in the screen, or press the simple config button on your Router.
54
Simple Config Button
User Guide
August 2007
Advertisement
Table of Contents
