Table of Contents
Advertisement
VersaLink Wireless Gateway (Model 7500)
16.10 DNS Server
In the Advanced screen, click DNS Server. The following screen will appear. Your Router contains a built-in DNS
server. When an IP address is assigned, the Router will interrogate the new device for a machine name using several
well-known networking protocols. Any names learned will dynamically be added to the DNS server's table of local
hosts.
Do any of the following:
•
To rename the Domain Name, type a domain in the Domain Name field and then click Set.
•
To add a host name, click Add DNS Entry
Domain Name
NOTE: Some ISP's may
require the name for
identification purposes.
Host Name
IP Address
This field displays a list of the computers on the LAN that were assigned a DHCP Address. The DNS name and
IP address entry of each discovered device is displayed. (The values in this field will be displayed barring any
propagation delays. If 'No Discovered Devices' is displayed, manually refresh the screen.)
030-300536 Rev. A
This field allows you to enter a Domain Name for your Router
To add a Domain Name, in the field under User Assigned DNS, type in your new
domain name and click Set.
This field allows you to enter a HOST name for Router.
To add a new Host name, in the field under Static Host Assignment, type in the Host
Name and the IP address and click Set.
Displays the IP address that is assigned to the Host Name.
Discover Local Devices
145
User Guide
August 2007
Advertisement
Table of Contents
