Ct Specifications - Taie FY400 Operation Manual

Notes
1. ANL2 & ANH2 is the current signal calibration parameters. It has been calibrated before leaving the factory.
do not change these two parameters value.
2. The user only needs to set HBAC & HBOP, the rest of the parameters will be set & calibrated at the factory.
3. CT has two specifications: SC 80-T & SC 100-T. Please check heater wire diameter and specify required CT.

CT Specifications

Item
Model number
Max. continuous current
Accuracy
Aperture
Dieiectric Withstanding Voltage(Hi-pot)
Vibration resistance
Weight
Dimensions (UNIT：mm)
45
Specifications
SC 80-T SC 100-T
80A 100A
3% 5%
5.9mm 12.6mm
2500Vrms / 1 minute 4000Vrms / 1 minute
2
50 HZ, 98 m/s
Approx. 12 g Approx. 30 g
SC 80-T
SC 100-T
FY operation manual