Level_1 Parameter - Taie FY400 Operation Manual

10.5 LEVEL_1 Parameter

Parameter Symbol
PV ---
SV ---
OUTL
AT
* AL1
SOAK
HBAC
* AL2
HBAC
SOAK
* AL3
SOAK
RAMP
RATE
* Automatically display corresponding parameters according to different setting conditions
EX1: When alarm1 is used as HBA function(ALD1= 09), original AL1 will become HBAC display
EX2: When alarm2 is used as SOAK_B function(ALD2= 19), original AL2 will become SOAK display
EX3: When alarm3 is used as RAMP function(ALD3= 09), original AL3 will become RAMP display
29
Content
Process value
Set value
High limit setting of manipulated value
when PID gain > OUTL use OUTL as
manipulated value
Auto-tuning execute selection
0 : NO (PID control)
1 : YES (execute auto-tuning)
2 : PR.TU (Startup tunning, execute once)
3 : PRTU (Startup tunning, execute always
when reboot)
Alarm1 set value
(Please refer to Chapter 12)
Alarm1 soak time
Time format : hr.min
HBA current setting value
Upper : heater current display
Down : current setting value
unit : ampere(A)
Alarm2 set value
(Please refer to Chapter 12)
HBA current setting value
Upper : heater current display
Down : current setting value
unit : ampere(A)
Alarm2 soak time
Time format : hr.min
Alarm3 set value
(Please refer to Chapter 12)
Alarm3 soak time
Time format : hr.min
The rate of change during SV ramp
operation
format : °C / minute
(Please refer to Chapter 11.7)
Slave SV rate
RATE SV = SV x (RATE/9999)
(Please refer to Chapter 11.9)
Range
Default
MAX MIN
USPL LSPL ---
USPL LSPL ---
100.0 0.0 100.0
PRTU NO NO
9999 -1999 1.0
99.59 0.00 0.10
100.0 0.0 1.0
9999 -1999 1.0
100.0 0.0 1.0
99.59 0.00 0.10
9999 -1999 1.0
99.59 0.00 0.10
99.99 -19.99 10.00
9999 0 9999
Hide/
Display
---
---
SET1.1
SET1.2
SET1.3
ALD1=10
or
ALD1=19
INP2=4
&
ALD1=9
SET1.4
INP2=4
&
ALD2=9
ALD2=10
or
ALD2=19
SET2.1
ALD3=10
ALD3=9
&
SET2.1
SET2.1
&
SET0.2
FY operation manual