Unpacking The Kit; Verifying The Kit Contents - National Instruments cRIO-9037 Getting Started Manual

Unpacking the Kit

Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following items are included in the cRIO-9037 kit.
1. cRIO Device with Power Connector
2. Antenna (x2)
3. USB A-to-B Cable
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
Figure 1. cRIO-9037 Kit Contents
1
4
2
5
4. Ferrite (x2)
5. cRIO Device Drivers Media
6. Getting Started Guide
NI cRIO-9037 Getting Started Guide | © National Instruments | 5
3
6