Table of Contents
Advertisement
DOWNLOADING AND INSTALLING THE APPS
DOWNLOAD THE APPS
There are two apps that accompany this item. One app,
called the control app, allows you to control, program,
and adjust the balance settings of your robots. The other
app provides you with 3D digital assembly instructions.
This app guides you step by step through building each
model.
You can download these free apps for iOS devices from the
iOS App Store, or for Android devices from Google Play.
For specific device requirements, see the app pages in the
app stores.
To get the apps:
1. Turn on your tablet or smartphone.
2. If you have a QR code reader installed, you can scan the
QR code to right to take you to the product page for this
kit.
3. On the product page, scroll down until you see the
images of the app icons and the links to the app pages in
the app stores. Follow the links for the correct app store
based on your device.
4. Follow the steps on the app download page to
download and install the app on your device.
5. Open the apps and begin using them. For instructions on
how to use the controller app and to start testing it,
continue to the next page.
The digital assembly instruction app is self-
explanatory. You can use it in place of the assembly
steps printed in this manual.
Programming the Robots
HoverBots
HoverBots Assembly
Instructions
Scan this QR code to go
to the product page,
where there are links to
download the apps
from the app stores.
7
Advertisement
Table of Contents
