PROGRAMMING
SAMPLE PROGRAM FOR THE BALANCING DINO ROBOT
1. Assemble the model using the instructions on the previous pages. Put the
model on the floor in an open area. Hold it upright and turn it on.
2. Establish the Bluetooth connection with the app. Open the Balancing Dino
Robot program. Note that the balance setting is set to H.
3. Press the run button. Hold the model until it is standing upright and
balancing on its own. Below, write down what the robot does for each
command step of the program.
Balance
Setting:
H
WHAT'S HAPPENING?
Record your observations here.
Programming the Balancing Dino Robot
Programming the Turtle Robot
53
53