Table of Contents
Advertisement
PROGRAMMING
SAMPLE PROGRAM FOR THE TARGET PRACTICE ROBOT
1. Assemble the model using the instructions on the previous pages. Put the model
on the floor in an open area. Hold it upright and turn it on.
2. Establish the Bluetooth connection with the app. Open the Target Practice Robot
program. Note that the balance setting is set to G.
3. Press the run button. Hold the model until it is standing upright and balancing on
its own. Toss crumpled up paper balls at the robot and try to hit the vertical
target. Is it able to stay balanced? Below, write down what the robot does for
each command step of the program. Can you add more command steps to the
program to make the robot move around more and make the target harder to hit?
Balance
Setting:
G
WHAT'S HAPPENING?
Record your observations here.
Programming the Target Practice Robot
Programming the Turtle Robot
Target
47
47
Advertisement
Table of Contents
