Table of Contents
Advertisement
PROGRAMMING
SAMPLE PROGRAM FOR THE BALANCING BIRD
1. Assemble the model using the instructions on the previous pages.
Put the model on the floor in an open area. Hold it upright and
turn it on.
2. Establish the Bluetooth connection with the app. Open the
Balancing Bird program. Note that the balance setting is set to E.
3. Press the run button. Hold the model until it is standing upright
and balancing on its own. Observe the balancing bird's behavior
as the robot runs the program. Below, write down what the robot
does for each command step of the program.
Balance
Setting:
E
WHAT'S HAPPENING?
Record your observations here.
Programming the Balancing Bird
35
35
Advertisement
Table of Contents
