Possible Malfunctions - Bartscher Samovar 3L Instruction Manual

8. Possible Malfunctions

In case of malfunction set the temperature controller in position
device from the power supply (pull the plug!). Before contacting the service or sales
agent, verify - based on the table below - whether it is possible to eliminate disruption in
operation.
FAILURE
The device is not
working
The device is
turned on but the
control light is off.
The device
turns off.
If you cannot remove the malfunctions:
- do not open the body,
notify the customer service point or contact the sales
-
agent, while providing the following information:

type of malfunction;

article and serial number (see rating plate on device underside);

date of purchase.
CAUSE
 The plug is not connected
to the socket.
 The house electric system
protection has been acti-
vated due to operation of
many high-power devices.
 The temperature controller
is in position
 Damaged control light.
 Incorrect setting of
temperature controller.
 The protection against dry
operation has been
activated due to lack or
insufficient amount of
water in the tank.
 Connect the plug to the
electric socket.
 Disconnect the device
from the power supply.
Then reset the fuse.
 Set the temperature
controller in desired
.
position.
 Contact the vendor.
 Set the temperature
controller in appropriate
position.
 Wait for the device to
cool down and pour
the water.
and disconnect the
SOLUTION
- 47 -