6. Start-up and operation
6.1 Before operation
Before operation become familiar with the device and equipment by reading this
manual.
Before the device operation clean it thoroughly according to the instructions in
section 7 "Cleaning and descaling".
Fill the water reservoir to its maximum capacity (as indicated) and boil.
Pour the water out. Repeat it 2 - 3 times.
Before start-up make sure that the device is in perfect condition.
6.2 Start-up
Temperature controller settings
Control light
Stufe Function
The device is turned off
Interval boiling: Approx. 1/4 to 1/2 rotation backwards after water
- 38 -
Warm water: Approx. 3/4 rotation backwards,
water temperature approx. 60 °C - 70 °C
Hot water: Approx. 1/2 rotation backwards,
water temperature approx. 85 °C - 95°C
Boiling water: Temperature controller turned completely; water
temperature approx. 100 °C
boiling; water temperature approx. 95 °C - 100°C
Temperature controller