Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 120.791 Instruction Manual

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

PROBLEM
The device is switched
on, but does not heat up.
„Metal"-sound during
operation.
The device does not
generate any steam.
The foods are burnt
despite correctly set
baking/ cooking times.
The above mentioned problem cases are exemplary and just meant for
orientation. If these or similar problems should occur, switch off the device
immediately and stop the use. Contact qualified professionals or your retailer for
further inspection an repairs.
- 36 -
POSSIBLE CAUSES
•
The device is plugged to
the power socket.
•
Timer switch is not set.
•
Temperature control is
not set.
•
Fan is not set correctly.
•
Not enough water in the
water tank.
•
Fan is defective.
•
Temperature control is
defective.
SOLUTION
•
Connect the power plug
to an appropriate power
socket.
•
Set the time.
•
Set the temperature.
•
Contact your retailer.
•
Fill the water tank.
•
Contact your retailer.
•
Contact your retailer.