Threading The Machine; Needle Threader - ELNA eXplore 220 Instruction Manual

1
3
1
2
3 4
2
4
5
6

Threading the Machine

Turn the flywheel toward you to raise the needle to
its highest position.
Raise the presser foot.
1. Pull the thread under the thread guide.
2. Guide the thread down the right side slot into
the tension area, continuing down around the
check spring holder.
3. Firmly pull the thread from right to left, over the
take-up lever and down into the take-up lever
eye.
4. Pull the thread down behind the lower thread
guide.
5. Pull thread down behind left needle bar thread
guide.
6. Pass the thread through the needle eye from the
front or use the needle threader.

Needle Threader

Raise the needle to its highest position.
1.
Pull down the needle threader knob as far
as it will go.
Turn the knob in the direction of the arrow in the
2.
illustration, then insert the hook into the needle eye.
Lead the thread around the guide and under the
hook.
Turn the knob in the direction of the arrow in the
3.
illustration. drawing the thread loop through the
needle.
4. Pull the thread through the needle eye.
* The needle threader can be used with a
#11 to #16 needle or Blue tipped needle.
Thread size 50 to 90 should also work well.
28