Table of Contents
Advertisement
Response： 841F140000000000000000 (Current device parameter)
(5) Setting the Pulse Counter Clear Mode = 0x01_Clear When Roll-Over
Downlink： 051F010000000000000000
Response：
851F000000000000000000 (Configuration success)
851F010000000000000000 (Configuration failure)
(6) Read the Pulse Counter Clear Mode Configuration:
Downlink： 061F000000000000000000
Response： 861F010000000000000000 (Current device parameter)
Example for MinTime/MaxTime logic:
Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V
MaxTime
Sleeping(MinTime)
Wakes up and collects data
REPORTS 3.6V
Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BatteryVoltageChange
value.
Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Sleeping(MinTime)
th
0H
15
M
Wakes up and
Wakes up and
collects data
collects data
REPORT 3.6V
3.6V
Does not report
Wakes up and collects data
REPORTS 3.6V
MaxTime
sleeping
sleeping
th
30
M
Wakes up and
collects data
3.6V
Does not report
MaxTime
Sleeping(MinTime)
sleeping
th
45
M
1H
Wakes up and
Wakes up and
collects data
collects data
3.6V
REPORTS 3.6V
Does not report
8
Wake up and collects data
REPORTS 3.6V
2H
Advertisement
Table of Contents
