Engine Maintenance; Periodic Maintenance Schedule: Wacker Neuson Wm170 - Husqvarna CT 36 Series Operator's Manual

Engine Maintenance

6 Engine Maintenance
6.1

Periodic Maintenance Schedule: Wacker Neuson WM170

The table below lists basic machine and engine maintenance. Tasks designated
with check marks may be performed by the operator. Tasks designated with square
bullet points require special training and equipment.
Refer to the engine owner's manual for additional information.
Check fuel level.
Check engine oil level.
Inspect fuel lines.
Inspect air filter. Replace as needed.
Check external hardware.
Clean air cleaner elements.
Change engine oil.
Clean sediment cup / fuel filter.
Check and clean spark plug.
Check and adjust valve clearance.
Replace spark plug.
* Perform initially after first 20 hours of operation.
Maintenance, replacement or repair of emission control devices and systems may be performed by any repair
establishment or individual.
Daily After
2 weeks
before first 20
starting hours





*

46
Walk-Behind Trowels
Every
Every
month
or
or
100
50 hrs. 300 hrs.
hrs.




wc_tx004129gb_FM10.fm
Every
year Every
or 500 hrs.

