Transporting The Machine - Husqvarna CT 36 Series Operator's Manual

Walk-Behind Trowels
3.2

Transporting the Machine

Requirements
■ Transport vehicle capable of handling the weight of the trowel. See topic
Dimensions and Weight for the weight of the machine.
■ Suitable ropes or chains.
Procedure
Perform the procedure below to tie down and transport the machine.
1. Adjust the pitch (angle) to flatten the trowel blades until the pitch cable is loose.
2. Lift the trowel onto the transport vehicle.
3. Position the handle so that it does not protrude outside of the transport vehicle.
4. Connect the ropes/chains to the ring guard of the trowel as follows.
a. Connect them as low on the ring guard as possible to minimize stress on the
b. Use a crossing pattern (a).
5. Connect the ropes/chains to the transport vehicle. Do not overtighten them.
Result
The machine is now ready to be transported.
wc_tx004126gb_FM10.fm
gearbox output shaft.
Lifting and Transporting
a
27