Installing The Blades - Husqvarna CT 36 Series Operator's Manual

Operation
4.4

Installing the Blades

Background Four types of blades are available for the trowels.
Note: Trowel blades must NOT be interchanged, i.e., do NOT put larger diameter
blades on a smaller diameter trowel.
Procedure Perform the procedure below to install the blades.
1. Orient blades as shown (a). This positions the raised edges of the blade
correctly for the clockwise rotation of the trowel arms.
This procedure continues on the next page.
Blade When to Use
Float blade Early stages
Combination Used throughout
Finish Final stages
Float pan Used throughout
Walk-Behind Trowels
Description
■
Not pitched
■
Clips on over finish or combination
blades
■
Used in place of the other blades
■
Cannot be mixed with finish or float
blades
■
Pitched
■
Flat on both edges
■
Can be installed in either direction
■
Not pitched
■
Hooks over finish or combination
blades
c
a
30
b
wc_gr001097
wc_tx004127gb_FM10.fm