Nexcom NDiS S538 User Manual page 52

Chapter 4: BIOS Setup
NCT6106D HW Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Pc Health Status
[Enabled]
Smart Fan Function
Cpu Fan Mode [Thermal CruiseTM Mode]
CpuFan Target Temp 55
CpuFan Tolerance 5
CPU temperature : +34 ºc
CPU FAN Speed : 3600 RPM
System Fan Mode [Enable]
VCORE : +0.952 V
VCC5 : +5.080 V
VCC3 : +3.328 V
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Smart Fan Function
Enables or disables the smart fan function.
Cpu Fan Mode
Configures the fan mode of the CPU fan. The options are Thermal Cruise
Mode (automatic fan mode), Fan Speed Cruise Mode and SmartFan III Mode.
CpuFan Target Temp
Displays the temperature threshold to activate smart fan.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
CpuFan Tolerance
Displays the tolerance value for increasing and decreasing the fan speed.
The fan speed will increase when the CPU temperature reaches the value
in CpuFan Target Temp plus the value in CpuFan Tolerance. The fan speed
will decrease when the CPU temperature is below the CpuFan Target Temp
minus the value in CpuFan Tolerance.
Enable or Disable Smart Fan
System Fan Mode
Configures the operating mode of the system fan.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
38
NDiS S538 User Manual