Kioti DK6010 Owner's Manual page 149

Hide thumbs Also See for DK6010:
Table of Contents

Advertisement

2. If you operate the steering wheel
with the tractor loaded, using the
implement or loader, the steering
wheel operation can be somewhat
a little heavy. operate the steering
while tractor is in motion
3. When a loader is mounted, adjust
the air pressure of the front wheel
to its maximum specification and
mount weight or implement on the
3 point hitch of the tractor, and re-
move the front weight to make the
front and rear balance more stable
for safe working.
4. When turning the steering wheel to
its end, the operating sound of the
safety valve (Relief valve) can be
heard. do not operate the tractor if
the valve sound is heard continu-
ally. (ok for a short period of time).
The temperature of the hydraulic
fluid may rise, causing malfunc-
tions.
TD210-EEC인증용-DK6010H,DK6010C,DK621 21
NOTE
The power steering system in this
tractor is a load reaction, full hy-
draulic type.
The full hydraulic system means
that power necessary for power
steering is transferred by hydrau-
lic fluid only and therefore me-
chanical devices, such as racks
and pinions, are not installed to
the tractor. Therefore, it features
simpler structure. However, the
angles of the steering wheel and
front wheels are not bound to each
other, so they can be different
sometimes. Therefore, the angle
of the KIOTI emblem on the cen-
ter of the steering wheel may differ
occasionally, which is normal.
The load reaction type means
that the reaction force or impact
applied to the front axle is trans-
ferred to the steering wheel.
Therefore, the steering wheel can
be returned to its straightforward
position from the turning position.
opERATIoN
NOTE
Therefore, it is easy to control
the steering wheel during driving.
(It has automatic return function,
but its reactivity is not sensitive.)
WARNING
When driving on a road with
an implement attached to the
rear of the tractor, the contact
of the front wheels becomes
poor, resulting in poor steer-
ability. In this case, attach a
proper front weight and drive
at a low speed.
If a malfunction occurs while
driving on a road, stop the
tractor in a safe place and ser-
vice it. If it is not possible to
move the tractor, turn on the
hazard lights and set a warn-
ing triangle behind the tractor.
Otherwise, a rear end accident
may occur.
2018-04-20 오후 1:27:01
5
1
-
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents