Vecow ABP-3000 User Manual page 84

C.2 OS Installation
ABP-3000 is featured with two NVMe PCIe M.2 (2280) SSD storage.
We take two 1TB NVMe PCIe M.2 SSDs for Windows 10 OS installation as an
example.
C.3 To Install All Device Drivers of the System
The instructions are as follows :
1. Install Chipset driver
2. Install Graphics driver
3. Install ME driver (if available)
4. Install Network driver
5. Install Audio driver
® ®
6. Install Intel Rapid Storage Technology (Intel RST) driver
C.4 To Install "Intel® Rapid Storage Technology (Intel®
RST)" Software
You can get the software from the driver CD.
Also, you can find the latest information and software directly from Intel's website.
http://www.intel.com/p/en_US/support/highlights/chpsts/imsm
The RAID environment has been done if you completed the steps above.
C.5 To Insert NVMe PCIe M.2 SSD for RAID 1
There are two M.2 SSD sockets on the system board. The computer support M.2
SSD cards.
Please note, you can use two M.2 SSD sockets for NVMe PCIe M.2 (2280) SSD.
©Vecow ABP-3000 User Manual Appendix C 77