Vecow ABP-3000 User Manual page 16

2.2.6 USB 3.1
There are 4 USB 3.1 connections available supporting up to 10GB per second data
rate in the front side of ABP-3000 series. It also compliant with the requirements of
Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).
2.2.7 Display Port
Onboard Display Port support auxiliary channel dual mode, connection supports
up to 4096x2304 resolution at 60Hz.
2.2.8 PoE Ports
There are 2 RJ45 connectors in the rear side of ABP-3000. It supports IEEE 802.3at
+
(PoE ) Power over Ethernet (PoE) connection delivering up to 37W/54V per port
and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 4 are listed as follows :
Pin No.
1
2
3
4
5
6
7
8
©Vecow ABP-3000 User Manual
10/100 Mbps
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
®
I350 Gigabit Ethernet controller and
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
GETTING TO KNOW YOUR ABP-3000
PoE
PoE+
PoE+
PoE-
------
------
PoE-
------
------
9