Display Mode - Minolta EP1080 Service Manual

11. Display Mode

•
This mode permits checking of the time it takes the copier to complete different functions. (This
should only be used at the factory.)
Types of Displays
Multi-Copy
Description
Key
0 Warm-up time (×100 ms)
1 First copy time (×100 ms)
2 Multiple copy time (×100 ms)
6 Display test mode
Setting Procedure
(1) With the copier in the state ready to enter a particular Tech. Rep. Mode, press "0" to set the
copier into the Display Mode.
(2) Press the Multi-Copy Key that corresponds to the desired display type.
(3) Press the Clear Key. This makes the copier ready to accept entry of a new display type.
Magnification Ratio
Indicator (Time)
XXX
XXX
XXX
All Indicators blink.
S-24
Multi-Copy Display
(Code)
d0
d1
d2
d6