Winding Of The Lens Drive Cable - Minolta EP1080 Service Manual

(2) Winding of the Lens Drive Cable

6. Remove the Cable Drive Gear and the Lens Drive
Cable.
1. Hold the Cable Drive Gear in position with its Bead at
the bottom.
2. Wind the shorter length of the Cable three turns
clockwise around the Cable Drive Gear, working from
the back to the front side. Then tape it.
3. Wind the longer length of the Cable five turns
counterclockwise around the Cable Drive Gear,
working from the front to back side. Then tape it.
4. Slide the Cable Drive Gear onto its shaft and insert a
wrench into the holes to position the Cable Drive Gear.
D-20