Configuring I 2Of5 Bar Codes; Configuring D 2Of5 Bar Codes - Avery Dennison Monarch Pathfinder 6059 System Administrator Manual

Configuring I 2of5 Bar Codes

I 2of5 (Interleaved Two of Five) is a linear bar code for numeric data. Data is encoded in both
the bars and the spaces. Use the Printer Setup Application to configure the I 2of5 (Interleaved
2of5) bar code scanner options below.
Select To
Enabled Allows the scanner to scan I 2of5 bar codes.
Convert to Tells the scanner to convert 14-character I 2of5 bar codes into an
EAN13 EAN13 bar code. For the conversion to work, the following must occur:
♦ I 2of5 bar codes must be enabled.
♦ 14 must be a valid length.
♦ The data must have a leading zero.
♦ The data must include an EAN13 check digit.
Transmit Tells the scanner to return the check digit with the data when an I 2of5
Check Digit bar code is scanned.
Check Digit Tells the scanner to check the integrity of a scanned
Verification I 2of5 bar code to ensure it complies with either USS or OPCC
standards.
Length 1 Sets the length(s) for I 2of5 bar codes. Lengths include check digits.
Length 2 For variable length bar codes, set both Length 1 and Length 2 to 0.
For a variable range, set Length 1 to the lower limit and Length 2 to the
upper limit.
For one fixed length bar codes, set both Length 1 and Length 2 to the
same length. This specifies a single length for valid bar codes.
For two fixed length bar codes, set Length 2 to the shorter length and
Length 1 as the longer length.
The range for Length 1 is 0 to 99. The default is 14.
The range for Length 2 is 0 to 99. The default is 0.

Configuring D 2of5 Bar Codes

D 2of5 (Discrete Two of Five) is a linear bar code for numeric data. Data is only encoded in the
bars. Use the Printer Setup Application to configure the D 2of5 bar code scanner options
below.
Select To
Enabled Allows the scanner to scan D 2of5 bar codes.
Length 1 Sets the length(s) for D 2of5 bar codes. Lengths include check digits.
Length 2 For variable length bar codes, set both Length 1 and Length 2 to 0.
For a variable range, set Length 1 to the lower limit and Length 2 to the
upper limit.
For one fixed length bar codes, set both Length 1 and Length 2 to the
same length. This specifies a single length for valid bar codes.
For two fixed length bar codes, set Length 2 to the shorter length and
Length 1 as the longer length.
The range for Length 1 is 0 to 99. The default is 12.
The range for Length 2 is 0 to 99. The default is 0.
Classification: Avery Dennison – Public
Configuring the Scanner 3-7