Resetting The Printer To Factory Defaults; Using The Asset Tracking Application; Editing Owner Data - Avery Dennison Monarch Pathfinder 6059 System Administrator Manual

R e s e t t i n g t h e P r i n t e r t o F a c t o r y D e f a u l t s
Use the standard Android Settings app Backup & reset function to reset the printer to factory
defaults.
Performing a factory default erases all previously installed applications and requires
reformatting the SD card. Application data is saved if it was backed up.
W h a t i f I F o r g e t M y P a s s w o r d / P a s s c o d e ?
You may lock the printer with a password or passcode. If you forget the password/passcode,
contact Service to recover the printer. Service can reset the printer, but you will lose all
installed applications and data on the SD card (if it was not backed up).
Please keep your password/passcode in a secure location.
U s i n g t h e A s s e t T r a c k i n g A p p l i c a t i o n
Asset tracking contains the manufacturer's product ID and serial number, and the owner's
product ID and serial number. A password is required to edit this data. The default password is
123321. You can print an asset tracking label that contains the product IDs and serial numbers
for your records.
Editing Ow ner Data
To edit the owner data:
Open the Asset Tracking application.
1.
Tap the pencil to edit the data.
2.
Enter the password (123321).
3.
4. Select the Owner Product ID field.
Use the keyboard or scan a bar code to enter a new Product ID.
5.
Select the Owner Serial Number field.
6.
Use the keyboard or scan a bar code to enter a new Serial Number.
7.
8. Select the Owner Data field and enter your information.
Note: The OEM Product ID and Serial Number cannot be changed as it is entered by the
Manufacturer.
Tap Save.
9.
1-4 System Administrator's Guide
Classification: Avery Dennison – Public