3.
Set the Read Power. For example, set the read power to 15.
4.
Select Read Tag. Data appears on the display. If you see error 741, the read power may
not be strong enough or the inlay is not in the correct place.
For example:
The programmed data is displayed in ASCII Hex format.
The top line displays the EPC data; the bottom line displays the TID data.
The leading 0 before the EPC data is used for error codes.
If the tag cannot be read, you may see "Illegal Command" or a different message from
your application developer.
Classification: Avery Dennison – Public
Using RFID 4-5