Setting The Sensor Type; Calibrating The Sensors; Feeding A Label - Avery Dennison Monarch Pathfinder 6059 System Administrator Manual

S e t t i n g t h e S e n s o r T y p e
The printer can print on black mark, non-
indexed (fax/receipt paper), and die cut
supplies (with black marks). The printer
defaults to using the black mark sensor.
Your printer may have a custom application
that automatically sets this value. Set the
printer's sensor type to match the loaded
supplies.
Refer to "Calibrating the Sensors" in the
printer's Equipment Manual to calibrate the
supply.
Select
Black Mark
Non-indexed
Die Cut with black marks
C a l i b r a t i n g t h e S e n s o r s
Calibrate the sensors
♦
on initial printer setup
♦
whenever the sensor/supply is changed (from black mark to die cut or vice versa)
♦
if using labels with a different color backing (besides white).
Refer to the printer's Equipment Manual for information about calibrating supply.
F e e d i n g a L a b e l
To feed a blank (or printed label), press Feed from the Supply Menu. A blank label feeds out of
the printer.
2-2 System Administrator's Guide
For
Black mark supplies have black marks on the back of the
supply for sensing.
Continuous supplies such as fax or receipt paper that do
not have any sense marks.
Die cut supplies with black marks on the back of the
supply for sensing.
Classification: Avery Dennison – Public