Table of Contents
Advertisement
Configuring Code 93 Bar Codes
Code 93 is a linear one-dimensional bar code that provides higher density than Code 39. Use
the Printer Setup Application to configure the Code 93 bar code scanner options below.
Select
To
Enabled
Allows the scanner to scan Code 93 bar codes.
Length 1
Sets the length(s) for Code 93 bar codes. Lengths include check digits.
Length 2
For variable length bar codes, set both Length 1 and Length 2 to 0.
For a variable range, set Length 1 to the lower limit and Length 2 to the
upper limit.
For one fixed length bar codes, set both Length 1 and Length 2 to the
same length. This specifies a single length for valid bar codes.
For two fixed length bar codes, set Length 2 to the shorter length and
Length 1 as the longer length.
The range for Length 1 is 0 to 99. The default is 4.
The range for Length 2 is 0 to 99. The default is 55.
Configuring Code 128 Bar Codes
Code 128 is a high density linear code for alphanumeric or numeric data. Use the Printer Setup
Application to configure the Code 128 bar code scanner options below.
Select
To
Enabled
Allows the scanner to scan Code 128 bar codes.
UCC/EAN-128
Allows the scanner to scan UCC/EAN-128 bar codes.
ISBT 128
Allows the scanner to scan ISBT 128 bar codes. Any length bar code is
valid.
Length 1
Sets the length(s) for Code 128 bar codes. Lengths include check digits.
Length 2
For variable length bar codes, set both Length 1 and Length 2 to 0.
For a variable range, set Length 1 to the lower limit and Length 2 to the
upper limit.
For one fixed length bar codes, set both Length 1 and Length 2 to the
same length. This specifies a single length for valid bar codes.
For two fixed length bar codes, set Length 2 to the shorter length and
Length 1 as the longer length.
The range for Length 1 is 0 to 99. The default is 0.
The range for Length 2 is 0 to 99. The default is 0.
3-6 System Administrator's Guide
Classification: Avery Dennison – Public
Hide quick links:
Advertisement
Table of Contents
